Fluke TI450 SF6 User Manual - Page 45

Zoom (Ti450), eyes. Have the Product repaired only through an approved

Get Fluke TI450 SF6 PDF manuals and user guides View all Fluke TI450 SF6 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Thermal Imagers Menus W* Warning To prevent eye damage and personal injury: • Do not look into the laser. Do not point the laser directly at persons or animals or indirectly off reflective surfaces. • Do not open the Product. The laser beam is dangerous to eyes. Have the Product repaired only through an approved technical site. To use the distance measurement feature: 1. Go to Image > Distance. 2. Push / to select On/Off or Units. 3. Push  to set the change and go back to the live view. 4. Point the Imager at the target. 5. Pull the secondary trigger. 6. Locate the red laser dot on the target. 7. Release the Laser Distance Finder button. The distance measurement shows on the bottom of the display. The measurement shows as "- - - -" when the Imager is not able to take a measurement. If this is the case, steady the Imager and retake the measurement. Or, use a tripod. The Imager will show an error message for excessive laser movement due to an out of range distance. Zoom (Ti450) The Imager has 1X, 2X, and 4X digital zoom.1X is the default Zoom setting. To set: 1. Go to Image > Zoom. 2. Push / or touch the target to change the setting. 3. Push  or touch Done to select the new setting. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
Thermal Imagers
Menus
41
W*
Warning
To prevent eye damage and personal injury:
•
Do not look into the laser. Do not point the laser directly at
persons or animals or indirectly off reflective surfaces.
•
Do not open the Product. The laser beam is dangerous to
eyes. Have the Product repaired only through an approved
technical site.
To use the distance measurement feature:
1.
Go to
Image
>
Distance
.
2.
Push
/
to select
On/Off
or
Units
.
3.
Push
to set the change and go back to the live view.
4.
Point the Imager at the target.
5.
Pull the secondary trigger.
6.
Locate the red laser dot on the target.
7.
Release the Laser Distance Finder button.
The distance measurement shows on the bottom of the display. The
measurement shows as “- - - -” when the Imager is not able to take a
measurement. If this is the case, steady the Imager and retake the
measurement. Or, use a tripod. The Imager will show an error message for
excessive laser movement due to an out of range distance.
Zoom (Ti450)
The Imager has 1X, 2X, and 4X digital zoom.1X is the default Zoom setting.
To set:
1.
Go to
Image
>
Zoom
.
2.
Push
/
or touch the target to change the setting.
3.
Push
or touch
Done
to select the new setting.