Fluke TI450 SF6 User Manual - Page 55
Fluke Connect Tools, Fluke.., Thermal Imager, Fluke Connect, Pair to Fluke Connect, Tools, Select
View all Fluke TI450 SF6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Thermal Imagers Menus 4. Select the Wi-Fi network that begins with Fluke... 5. Go to the Fluke Connect App and select Thermal Imager from the list. You are now able to take images on the Imager. Images stream live from the Imager to your mobile device. Live streaming may not be available on all devices. The pictures you take with the Imager are saved on your mobile device and on the Imager. Note To save images to the Fluke Connect app, set the file format to .is2 (see File Format) and the image storage to internal memory (see Image Storage). Images stored on the SD card or USB storage device may not transfer to the Fluke Connect app. 6. Push the Image Capture button on the Imager to capture the image. The image is now in the buffer and you can save or edit. 7. Push to save the image and view the image on the phone app. Go to www.flukeconnect.com for more information about how to use the app. Fluke Connect Tools To discover a Fluke Connect-supported tool: 1. Turn on each wireless tool and make sure the wireless feature is enabled. See the documentation of each tool for more information about how to use the tool. 2. Turn on the Imager. 3. On the Imager, go to Menu > Fluke Connect > Pair to Fluke Connect Tools. 4. Push / or touch On to highlight the selection. 5. Push to save the selection. The Fluke Connect button on the wireless tool starts to flash. The Imager starts to scan and presents a list with the ID and name of available tools found within 20 m without obstructions (open air) or within 6.5 m with obstructions (sheetrock wall). You can expect a short delay before the scan is complete. 6. Push / or touch the target to select a tool name. 7. Push or touch Select to select the tool. 51