Fluke TI450 SF6 User Manual - Page 63
Remote Control (Ti400 and Ti450), Maintenance
![]() |
View all Fluke TI450 SF6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Thermal Imagers Remote Control (Ti400 and Ti450) Remote Control (Ti400 and Ti450) The Imager can be remotely controlled with a PC that has SmartView software installed or with a mobile device that has the Fluke Connect app. To remotely control the Imager with a PC: 1. Turn on Remote Display. See Stream Live to a PC. 2. In SmartView software, select SmartView (Camera is the default selection). You can control all of the menus on the Imager from the PC. You cannot control the menus on the Imager directly. To remotely control the Imager with the Fluke Connect app: 1. Set up the Fluke Connect system. See Fluke Connect Wireless System. 2. On the mobile device, tap on the streaming image. An option shows to Remote Control the Imager. 3. Select Yes. From the mobile device, you can change the IR-Fusion setting, select Auto Focus to turn on LaserSharp Auto Focus, or tap the green Capture button to take an image. You can change the other menu items on the Imager directly on the Imager even while the mobile device remotely controls the Imager. Maintenance The Imager does not require maintenance. W* Warning To prevent eye damage and personal injury, do not open the Product. The laser beam is dangerous to eyes. Have the Product repaired only through an approved technical site. 59
![](/manual_guide/products/fluke-ti450-user-manual-2d869c6/63.png)