Fluke TI450 SF6 User Manual - Page 51
Network, Name SSID, Password, Channel, Camera, Wireless, WiFi Network, Select
View all Fluke TI450 SF6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Thermal Imagers Menus 4. Push / to highlight an option: • Name (SSID) to change the SSID • Password to turn the password on/off or to change the password • Channel to change the channel 5. Push to select the option. 6. Push to go back. 7. Push again to use the camera. WiFi Network When the WiFi Network is active on the Imager, the Imager can connect to a WiFi network. When the Imager is connected to a WiFi network, you can sign into your Fluke Connect account on the Imager. See Sign In. To turn on the WiFi Network feature: 1. Go to Camera > Wireless > WiFi Network. 2. Push / to highlight On. 3. Push Select to scan for available networks within range of the Imager. 4. Push / to select a network. 5. Push to connect/disconnect. 6. Enter a password if you are prompted. CNX The Imager supports the Fluke CNX Wireless System (may not be available in all regions). It can discover up to 10 3000 Series wireless tools up to 20 meters away. From those 10 tools, you can select five tools to view their live measurements on the Imager display. The system works with Fluke CNX tools that were manufactured between 2012 and 2013. The Fluke CNX system was replaced by Fluke Connect software in current tools. 47