Fluke TI450 SF6 User Manual - Page 44
Logo, Distance, SuperResolution
View all Fluke TI450 SF6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Ti200, Ti300, Ti400,Ti450 Users Manual SuperResolution SuperResolution uses a 320 x 240 sensor to capture micro movements to create a 640 x 480 image. To use: 1. Press the trigger. 2. Hold the Imager still for ∼1 second. In SuperResolution mode, the Imager captures the data and processes the image. The image shows on the display of the Imager in ∼18 seconds. In SuperResolution (in PC only) mode, the image is not processed on the Imager so you cannot view the image on the Imager. Use SmartView software to view the image on your PC. Logo A Fluke logo shows on the display and captured images. You can choose to turn on or turn off the logo: 1. Go to Image > Logo. 2. Push / to highlight On or Off. 3. Push to set. With SmartView software, you can upload a custom logo to the Imager from your PC through the USB connection. Distance The Imager has a laser distance finder that measures, up to 30 meters, the distance from the Imager to a target. You can choose to show the distance on the display in imperial or metric units. The distance is saved to memory as part of the image. The laser warning symbol (*) shows in the Header zone of the display when you pull the secondary trigger. 40