Garmin GPSMap 498 Owner's Manual - Page 11
Simulator Mode, To place the GPSMAP 392/398/492/498 in Simulator - satellite
UPC - 753759052171
View all Garmin GPSMap 498 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Simulator Mode Simulator Mode turns the GPS receiver off for use indoors or practice. You can perform any of the functions discussed in the following pages in Simulator Mode. Keep in mind that the GPSMAP 392/398/492/498 does not track satellites in Simulator Mode, and this mode should never be used for actual navigation. All the waypoint and route planning completed in Simulator Mode is retained in memory for future use. WARNING: Do not attempt to navigate using Simulator Mode. When the unit is set to Simulator Mode, the GPS receiver is turned off. Any satellite signal strength bars shown are only simulations and do not represent the strength of actual satellite signals. BASIC OPERATION > SIMULATOR MODE To place the GPSMAP 392/398/492/498 in Simulator Mode: 1. Press and hold ADJ/MENU to show the Main Menu. Use the ROCKER to highlight the GPS tab, and then press ADJ/MENU once. 2. Use the ROCKER to highlight Start Simulator, and press ENTER. 3. Press QUIT to confirm the Running Simulator message that appears at the bottom of the screen. If the status bar is turned on, "Simulating" appears at the top of each of the main pages. 4. To turn off Simulator Mode, press ADJ/MENU, and select Stop Simulator. GPSMAP 392/398/492/498 Owner's Manual 3