HP 17-p000 17-p199 - Maintenance and Service Guide - Page 55

USB board, Disconnect the USB cable from the ZIF connector

Get HP 17-p000 PDF manuals and user guides View all HP 17-p000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

USB board Description USB board Spare part number 767120-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 26). 5. Remove the optical drive (see Optical drive on page 27). 6. Remove the base enclosure and top cover (see Base enclosure on page 30). Remove the USB board and cables: 1. Disconnect the USB cable from the ZIF connector (1). 2. Remove the Phillips screw securing the USB board (2), and lift the USB board (3) to remove it. Reverse this procedure to install the USB board and cables. Component replacement procedures 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
USB board
Description
Spare part number
USB board
767120-001
Before removing the USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
26
).
5.
Remove the optical drive (see
Optical drive
on page
27
).
6.
Remove the base enclosure and top cover (see
Base enclosure
on page
30
).
Remove the USB board and cables:
1.
Disconnect the USB cable from the ZIF connector
(1)
.
2.
Remove the Phillips screw securing the USB board
(2)
, and lift the USB board
(3)
to remove it.
Reverse this procedure to install the USB board and cables.
Component replacement procedures
47