HP 17-p000 17-p199 - Maintenance and Service Guide - Page 61
Speakers, Remove the optical drive see
View all HP 17-p000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
5. Lift the system board (2), and then remove the system board (3) by sliding it up and to the right at an angle. Reverse this procedure to install the system board. Speakers Description Speaker Kit (includes left and right front speakers and cables) Spare part number 763717-001 Before removing the speakers, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 26), 5. Remove the optical drive (see Optical drive on page 27). 6. Remove the top cover from the base enclosure (see Base enclosure on page 30). 7. Remove the WLAN module (see WLAN module on page 42). 8. Remove the system board (see System board on page 50). Component replacement procedures 53