HP 17-p000 17-p199 - Maintenance and Service Guide - Page 56

Hard drive, Remove the USB connector cable see

Get HP 17-p000 PDF manuals and user guides View all HP 17-p000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Hard drive Description 500 GB 5400 rpm 7 mm/ 9.5 mm 750 GB 5400 rpm, 9.5 mm 1 TB, 5400 rpm, 9.5 mm Hard Drive Hardware Kit Spare part number 778186-005 778190-005 778192-005 773501-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 26). 5. Remove the optical drive (see Optical drive on page 27). 6. Remove the base enclosure and top cover (see Base enclosure on page 30). 7. Remove the USB connector cable (see USB board on page 47). Remove the primary hard drive: ▲ Disconnect the hard drive cable from the system board (1), and then tilt the hard drive (2) and lift to remove it (3). 48 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
Hard drive
Description
Spare part number
500 GB 5400 rpm 7 mm/ 9.5 mm
778186-005
750 GB 5400 rpm, 9.5 mm
778190-005
1 TB, 5400 rpm, 9.5 mm
778192-005
Hard Drive Hardware Kit
773501-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
26
).
5.
Remove the optical drive (see
Optical drive
on page
27
).
6.
Remove the base enclosure and top cover (see
Base enclosure
on page
30
).
7.
Remove the USB connector cable (see
USB board
on page
47
).
Remove the primary hard drive:
▲
Disconnect the hard drive cable from the system board
(1)
, and then tilt the hard drive
(2)
and lift to
remove it
(3)
.
48
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts