HP 17-p000 17-p199 - Maintenance and Service Guide - Page 68

Power button board, Remove the Power button board and cable

Get HP 17-p000 PDF manuals and user guides View all HP 17-p000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

Power button board Description Power button board (includes cable) Spare part number 812177-001 Before removing the Power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 26), 5. Remove the optical drive (see Optical drive on page 27). 6. Remove the top cover from the base enclosure (see Base enclosure on page 30). 7. Remove the WLAN module (see WLAN module on page 42). 8. Remove the system board (see System board on page 50). Remove the Power button board and cable: 1. Turn the top cover upside down, with the back edge toward you. 2. Remove the 2 Phillips screws securing the Power button board to the base enclosure (1). 3. Remove the Power button board (2). NOTE: The Power button board's cable is attached to the base enclosure. Reverse this procedure to install the Power button board. 60 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
Power button board
Description
Spare part number
Power button board (includes cable)
812177-001
Before removing the Power button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
26
),
5.
Remove the optical drive (see
Optical drive
on page
27
).
6.
Remove the top cover from the base enclosure (see
Base enclosure
on page
30
).
7.
Remove the WLAN module (see
WLAN module
on page
42
).
8.
Remove the system board (see
System board
on page
50
).
Remove the Power button board and cable:
1.
Turn the top cover upside down, with the back edge toward you.
2.
Remove the 2 Phillips screws securing the Power button board to the base enclosure
(1)
.
3.
Remove the Power button board
(2)
.
NOTE:
The Power button board's cable is attached to the base enclosure.
Reverse this procedure to install the Power button board.
60
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts