HP 17-p000 17-p199 - Maintenance and Service Guide - Page 67
Remove the heat sink, Reverse this procedure to install the heat sink.
View all HP 17-p000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Remove the heat sink: ▲ Loosen the seven captive screws in the order listed on the heat sink (1), and then remove the heat sink (2). NOTE: The heat sink may vary by computer model and may have a different number of screws. The heat sink is marked with the order the screws should be removed in. Follow the order shown. NOTE: There is thermal paste between the heat sink and the processor. Reverse this procedure to install the heat sink. Component replacement procedures 59
Remove the heat sink:
▲
Loosen the seven captive screws in the order listed on the heat sink
(1)
, and then remove the heat sink
(2)
.
NOTE:
The heat sink may vary by computer model and may have a different number of screws. The
heat sink is marked with the order the screws should be removed in. Follow the order shown.
NOTE:
There is thermal paste between the heat sink and the processor.
Reverse this procedure to install the heat sink.
Component replacement procedures
59