HP 6120XG HP ProCurve Series 6120 Blade Switches Advanced Traffic Management G - Page 153

Multiple Instance Spanning-Tree Operation Displaying MSTP Statistics and Configuration Displaying the MSTP Configuration Displaying the Global MSTP Configuration. This command displays the switch's basic and MST region spanning-tree configuration, including basic port connectivity settings. Syntax: show spanning-tree config The upper part of this output shows the switch's global spanning-tree configuration that applies to the MST region. The port listing shows the spanning-tree port parameter settings for the spanning-tree region operation (configured by the spanning-tree < port-list > command). For information on these parameters, refer to "Configuring MSTP Per-Port Parameters" on page 4-26. Syntax: show spanning-tree < port-list > config This command shows the same data as the above command, but lists the spanning-tree port parameter settings for only the specified port(s) and/or trunk(s). You can list data for a series of ports and port trunks by specifying the first and last port or trunk of any consecutive series of ports and trunks. For example, to display data for port A20-A24 and trk1, use this command: show spanning-tree a20-a24,trk1 config Global Priority Global Hello Time Per-Port Hello Time (Overrides Global HelloTime on individual ports.) Per-Port Priority Figure 4-18. Example of Displaying the Switch's Global Spanning-Tree Configuration 4-54