HP 6120XG HP ProCurve Series 6120 Blade Switches Advanced Traffic Management G - Page 57
Example of Reassigning Primary VLAN and Changing the VLAN Name
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Static Virtual LANs (VLANs) Configuring VLANs For example, to reconfigure the switch to allow 10 VLANs: Note that you can execute these three steps at another time. Figure 2-23. Example of Command Sequence for Changing the Number of VLANs Changing the Primary VLAN. In the default VLAN configuration, the portbased default VLAN (DEFAULT_VLAN) is the Primary VLAN. However, you can reassign the Primary VLAN to any port-based, static VLAN on the switch. (For more on the Primary VLAN, refer to "The Primary VLAN" on page 2-45.) To identify the current Primary VLAN and list the available VLANs and their respective VIDs, use show vlans. Syntax: primary-vlan < vid | ascii-name-string > Reassigns the Primary VLAN function. Re-assignment must be to an existing, port-based, static VLAN. (The switch will not reassign the Primary VLAN function to a protocol VLAN.) If you re-assign the Primary VLAN to a non-default VLAN, you cannot later delete that VLAN from the switch until you again re-assign the Primary VLAN to another port-based, static VLAN. For example, if you wanted to reassign the Primary VLAN to VLAN 22 and rename the VLAN with "22-Primary" and display the result: Reassigns the Primary VLAN to VLAN 22. Renames VLAN 22 to "22-Primary". Figure 2-24. Example of Reassigning Primary VLAN and Changing the VLAN Name 2-34