HP 6120XG HP ProCurve Series 6120 Blade Switches Advanced Traffic Management G - Page 47
The Default VLAN Names Screen, 1Q VLAN ID : 1, Static Virtual LANs VLANs, Enter]
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Static Virtual LANs (VLANs) Configuring VLANs Default VLAN and VLAN ID Figure 2-14. The Default VLAN Names Screen 2. Press [A] (for Add). You will then be prompted for a new VLAN name and VLAN ID: 802.1Q VLAN ID : 1 Name : _ 3. Type in a VID (VLAN ID number). This can be any number from 2 to 4094 that is not already being used by another VLAN. (The switch reserves "1" for the default VLAN.) Remember that a VLAN must have the same VID in every switch in which you configure that same VLAN. (GVRP dynamically extends VLANs with correct VID numbering to other switches. Refer to chapter 3, "GVRP" .) 4. Press [v] to move the cursor to the Name line and type the VLAN name (up to 12 characters, with no spaces) of a new VLAN that you want to add, then press [Enter]. (Avoid these characters in VLAN names and ).) 5. Press [S] (for Save). You will then see the VLAN Names screen with the new VLAN listed. 2-24