HP 6120XG HP ProCurve Series 6120 Blade Switches Advanced Traffic Management G - Page 52
Example of Show VLAN Listing GVRP Enabled, Status, Port-Based, Protocol, Dynamic
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Static Virtual LANs (VLANs) Configuring VLANs Status: Port-Based: Port-Based, static VLAN Protocol: Protocol-Based, static VLAN Dynamic: Port-Based, temporary VLAN learned through GVRP (Refer to chapter 3, "GVRP" .) Voice: Indicates whether a (port-based) VLAN is configured as a voice VLAN. Refer to "Voice VLANs" on page 2-54. Jumbo: Indicates whether a VLAN is configured for Jumbo packets. For more on jumbos, refer to the chapter titled "Port Traffic Controls" in the Management and Configuration Guide for your switch. For example: When GVRP is disabled (the default), Dynamic VLANs do not exist on the switch and do not appear in this listing. (Refer to chapter 3, "GVRP" .) Figure 2-18. Example of "Show VLAN" Listing (GVRP Enabled) Displaying the VLAN Membership of One or More Ports. This command shows to which VLAN a port belongs. Syntax: show vlan ports < port-list > [detail] Displays VLAN information for an individual port or a group of ports, either cumulatively or on a detailed per-port basis. port-list: Specify a single port number, a range of ports (for example, a1-a16), or all. detail: Displays detailed VLAN membership information on a perport basis. 2-29