HP 6120XG HP ProCurve Series 6120 Blade Switches Advanced Traffic Management G - Page 97
show vlans, Example of Listing Showing Dynamic VLANs
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
GVRP Configuring GVRP On a Switch Switch "A" GVRP enabled. 3 Static VLANs: - DEFAULT_VLAN - VLAN-100 - VLAN-200 Port 1: Set to "Learn" Mode Switch "B" GVRP enabled. 1 Static VLANs: - DEFAULT_VLAN The show vlans command lists the dynamic (and static) VLANs in switch "B" after it has learned and joined VLAN-100 and VLAN-200. ProCurve (config)# show vlans Status and Counters - VLAN Information Maximum VLANs to support : 8 Primary VLAN : DEFAULT_VLAN Management VLAN : VLAN ID Name | Status 1 DEFAULT_VLAN | Port-based 100 GVRP_100 | Dynamic 200 GVRP_200 | Dynamic 300 GVRP_300 | Dynamic 400 GVRP_400 | Dynamic 500 GVRP_500 | Dynamic 600 GVRP_600 | Dynamic Dynamic VLANs Learned from Switch "A" through Port 1 Figure 3-9. Example of Listing Showing Dynamic VLANs Converting a Dynamic VLAN to a Static VLAN. If a port on the switch has joined a dynamic VLAN, you can use the following command to convert that dynamic VLAN to a static VLAN: Syntax: static < dynamic-vlan-id > Converts the a dynamic VLAN to a static VLAN. For example, to convert dynamic VLAN 333 (from the previous example) to a static VLAN: ProCurve(config)# static 333 When you convert a dynamic VLAN to a static VLAN, all ports on the switch are assigned to the VLAN in Auto mode. 3-17