HP 6535b HP Compaq 6530b Notebook PC and HP Compaq 6535b Notebook PC - Mainten - Page 105

Rear cover, then unplugging the AC Adapter from the computer.

Get HP 6535b - Compaq Business Notebook PDF manuals and user guides
UPC - 884420171874
View all HP 6535b manuals
Add to My Manuals
Save this manual to your list of manuals

Page 105 highlights

Remove the USB/digital media board cable: 1. Disconnect the USB/digital media board cable (1) from the system board. 2. Remove the three Phillips PM2.5×5.0 screws (2) that secure the USB/digital media board to the base enclosure. 3. Remove the USB/digital media board (3). Reverse this procedure to install the USB/digital media board. Rear cover Description Rear cover Spare part number 486291-001 Before removing the rear cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer. 4. Remove the battery (see Battery on page 48). 5. Remove the following: a. Hard drive (see Hard drive on page 54) b. Optical drive (see Optical drive on page 57) c. Keyboard (see Keyboard on page 63) d. Switch cover (see Switch cover on page 67) Component replacement procedures 95

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
Remove the USB/digital media board cable:
1.
Disconnect the USB/digital media board cable
(1)
from the system board.
2.
Remove the three Phillips PM2.5×5.0 screws
(2)
that secure the USB/digital media board to the
base enclosure.
3.
Remove the USB/digital media board
(3)
.
Reverse this procedure to install the USB/digital media board.
Rear cover
Description
Spare part number
Rear cover
486291-001
Before removing the rear cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
Battery
on page
48
).
5.
Remove the following:
a.
Hard drive (see
Hard drive
on page
54
)
b.
Optical drive (see
Optical drive
on page
57
)
c.
Keyboard (see
Keyboard
on page
63
)
d.
Switch cover (see
Switch cover
on page
67
)
Component replacement procedures
95