HP 6535b HP Compaq 6530b Notebook PC and HP Compaq 6535b Notebook PC - Mainten - Page 108

Modem module cable

Get HP 6535b - Compaq Business Notebook PDF manuals and user guides
UPC - 884420171874
View all HP 6535b manuals
Add to My Manuals
Save this manual to your list of manuals

Page 108 highlights

Remove the SIM connector board: 1. Remove the two Phillips PM2.0×5.0 screws (1) that secure the SIM connector board to the base enclosure. 2. Remove the SIM connector board (2) by sliding it forward, and then lifting it out of the base enclosure. Reverse this procedure to install the SIM connector board. Modem module cable NOTE: The modem module cable is included in the Cable Kit, spare part number 486281-001. Before removing the modem module cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer. 4. Remove the battery (see Battery on page 48). 5. Remove the following: a. Hard drive (see Hard drive on page 54) b. Optical drive (see Optical drive on page 57) c. Keyboard (see Keyboard on page 63) d. Switch cover (see Switch cover on page 67) e. Display assembly (see Display assembly on page 76) f. Top cover (see Top cover on page 83) g. Rear cover (see Rear cover on page 95) 98 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
Remove the SIM connector board:
1.
Remove the two Phillips PM2.0×5.0 screws
(1)
that secure the SIM connector board to the base
enclosure.
2.
Remove the SIM connector board
(2)
by sliding it forward, and then lifting it out of the base
enclosure.
Reverse this procedure to install the SIM connector board.
Modem module cable
NOTE:
The modem module cable is included in the Cable Kit, spare part number 486281-001.
Before removing the modem module cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
Battery
on page
48
).
5.
Remove the following:
a.
Hard drive (see
Hard drive
on page
54
)
b.
Optical drive (see
Optical drive
on page
57
)
c.
Keyboard (see
Keyboard
on page
63
)
d.
Switch cover (see
Switch cover
on page
67
)
e.
Display assembly (see
Display assembly
on page
76
)
f.
Top cover (see
Top cover
on page
83
)
g.
Rear cover (see
Rear cover
on page
95
)
98
Chapter 4
Removal and replacement procedures