HP 6535b HP Compaq 6530b Notebook PC and HP Compaq 6535b Notebook PC - Mainten - Page 106
and the two Phillips PM2.5×5.0, Remove the three Phillips PM2.5×3.0 broad-head screws
UPC - 884420171874
View all HP 6535b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
e. Display assembly (see Display assembly on page 76) f. Top cover (see Top cover on page 83) Remove the rear cover: 1. Turn the computer upside down, with the rear panel toward you. 2. Remove the three Torx8 T8M2.5×9.0 screws that secure the rear cover to the base enclosure. 3. Turn the computer right side up, with the front toward you. 4. Remove the three Phillips PM2.5×3.0 broad-head screws (1) and the two Phillips PM2.5×5.0 screws (2) that secure the rear cover to the base enclosure. 5. Lift the rear edge of the rear cover (1) until it disengages from the base enclosure. 96 Chapter 4 Removal and replacement procedures
e.
Display assembly (see
Display assembly
on page
76
)
f.
Top cover (see
Top cover
on page
83
)
Remove the rear cover:
1.
Turn the computer upside down, with the rear panel toward you.
2.
Remove the three Torx8 T8M2.5×9.0 screws that secure the rear cover to the base enclosure.
3.
Turn the computer right side up, with the front toward you.
4.
Remove the three Phillips PM2.5×3.0 broad-head screws
(1)
and the two Phillips PM2.5×5.0
screws
(2)
that secure the rear cover to the base enclosure.
5.
Lift the rear edge of the rear cover
(1)
until it disengages from the base enclosure.
96
Chapter 4
Removal and replacement procedures