HP 6535b HP Compaq 6530b Notebook PC and HP Compaq 6535b Notebook PC - Mainten - Page 87

Remove the four Torx T8M2.5×9.0 screws

Get HP 6535b - Compaq Business Notebook PDF manuals and user guides
UPC - 884420171874
View all HP 6535b manuals
Add to My Manuals
Save this manual to your list of manuals

Page 87 highlights

Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 48). 5. Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 59). 6. Remove the keyboard (see Keyboard on page 63). 7. Remove the switch cover (see Switch cover on page 67). Remove the display assembly: 1. Close the computer and turn it upside down, with the rear panel toward you. 2. Remove the Torx T8M2.5×9.0 screw (1) that secures the display assembly to the computer. 3. Remove the four Torx T8M2.5×9.0 screws (2) that secure the display assembly to the computer. 4. Turn the computer right-side up, with the front toward you. 5. Open the computer as far as possible. CAUTION: The display assembly will be unsupported when the left and right hinge cover screws are removed. To prevent damage to the display assembly, support it before removing the screws. 6. Remove the Phillips PM2.5×4.0 screw (1) that secures the left hinge cover to the computer. 7. Remove the left hinge cover (2). The display hinge covers are available using spare part number 486287-001. 8. Disconnect the display panel cable (3) from the system board. Component replacement procedures 77

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
48
).
5.
Disconnect the wireless antenna cables from the WLAN module (see
WLAN module
on page
59
).
6.
Remove the keyboard (see
Keyboard
on page
63
).
7.
Remove the switch cover (see
Switch cover
on page
67
).
Remove the display assembly:
1.
Close the computer and turn it upside down, with the rear panel toward you.
2.
Remove the Torx T8M2.5×9.0 screw
(1)
that secures the display assembly to the computer.
3.
Remove the four Torx T8M2.5×9.0 screws
(2)
that secure the display assembly to the computer.
4.
Turn the computer right-side up, with the front toward you.
5.
Open the computer as far as possible.
CAUTION:
The display assembly will be unsupported when the left and right hinge cover screws
are removed. To prevent damage to the display assembly, support it before removing the screws.
6.
Remove the Phillips PM2.5×4.0 screw
(1)
that secures the left hinge cover to the computer.
7.
Remove the left hinge cover
(2)
. The display hinge covers are available using spare part number
486287-001.
8.
Disconnect the display panel cable
(3)
from the system board.
Component replacement procedures
77