HP 6535b HP Compaq 6530b Notebook PC and HP Compaq 6535b Notebook PC - Mainten - Page 77
Switch cover, is attached, and disconnect the LED
UPC - 884420171874
View all HP 6535b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
3. Remove the WWAN module (3) by pulling the module away from the slot at an angle. NOTE: WWAN modules are designed with a notch (4) to prevent incorrect insertion into the WWAN module slot. Reverse this procedure to install the WWAN module. Switch cover Description Switch cover (includes power button board and cable and LED board and cable) Spare part number 486282-001 Before removing the switch cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer. 4. Remove the battery (see Battery on page 48). 5. Remove the keyboard (see Keyboard on page 63). Remove the switch cover: 1. Release the ZIF connector to which the LED board cable (1) is attached, and disconnect the LED board cable from the system board. 2. Lift the left and right sides of the switch cover (2) until it detaches from the computer. 3. Release the switch cover (3) as far as the power button board cable allows. Component replacement procedures 67