HP 9085mfp HP 9085mfp - (English) Quick Reference Guide - Page 25
To duplex single-sided copies from double-sided originals, START, RESET, SPECIAL ORIGINAL
View all HP 9085mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
CAUTION Reminder Details Hint CAUTION 10 Press START to print. All the data in memory will be output. Press STOP to suspend the printing job. When the finisher, trimmer unit, or paper output tray capacity is exceeded because of the print quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will occur. To duplex single-sided copies from double-sided originals Use RADF and select the 2X1 copy mode to make single-sided copies from double-sided originals. 1 Touch 2X1 on the Basic Screen to highlight it. When starting a new copying job, make sure that the RADF is securely closed, and press AUTO RESET. 2 Select the original set direction. Touch SPECIAL ORIGINAL on the Basic Screen to display the Special Original popup menu, and touch the desired original direction key to highlight it. Touch OK to return to the Basic Screen. 3 Select additional copy conditions, as desired. Some incompatible conditions might automatically release the selected copy mode. In this case, arrange the settings so that they are compatible with the selected copy mode. 4 Enter the desired print quantity from the control panel keypad. 5 Position the originals face up in the document feeder according to the original direction specified in step 2. Use the RADF store mode when the original count exceeds 100. 6 Press START. The machine starts to scan originals, and prints simplex copies when ready for output. Press STOP to suspend the scanning or printing job. When the finisher, trimmer unit, or paper output tray capacity is exceeded because of the print quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will occur. ENWW Duplexing (2-sided copying) 21