Home » HP Manuals » Multifunction Devices » HP 9085mfp » Manual Viewer

HP 9085mfp HP 9085mfp - (English) Quick Reference Guide - Page 35

To load tabbed sheets, Withdraw Tray 1

Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Hint Reminder To load tabbed sheets When TAB is displayed on the tray key of the Basic Screen, follow the procedure below to supply the tray with tabbed sheets. The tray's paper type can be specified in the Key Operator setting. Rear Example: Three tabbed sheets loaded in position for one finished set. Front Section 3 Printed side Section 1 First tab Second tab Third tab Rear First tab Second tab Third tab One finished set Example: Nine tabbed sheets loaded in position for three finished sets. Front Section 3 First tab Second tab Section 1 Section 1 Section 1 First tabs Second tabs Third tabs Printed side Third tab Three finished sets The tab extension width should be 12.5 mm or less. 1 Withdraw Tray 1, 2, or 3. 2 Open the paper feed roller. 3 Place the tabbed sheets on the tray as illustrated above. 4 Move the green levers (located at the front and the left side) to the edge of the paper. 5 Close the paper feed roller, and push in the tray until it locks into place. ENWW Trays 1, 2, and 3 31

Section	Page
Contents	3
Getting started	5
MFP parts	6
The MFP	6
The control panel	7
The touch screen	8
Turning the MFP on and off	10
Help mode	11
To display the Help Screen from the Basic Screen	12
To display the Help Screen from other screens	14
Copying	15
Using the flatbed unit	16
Positioning the original on the platen glass (scanning glass)	16
Using the RADF	17
To use the RADF	17
Choosing a paper size	19
To automatically the select copy size (APS)	19
To reduce and enlarge	20
Vertical/horizontal zoom (delete)	23
Duplexing (2-sided copying)	23
To duplex using the RADF	23
To duplex using the platen glass	24
To duplex single-sided copies from double-sided originals	25
Using the optional finisher features	26
To staple	26
To punch holes	26
To make a folded booklet (Folding or Stapling & Folding)	27
To make a Z-fold	28
To trim	28
To insert covers	29
Supported paper sizes for Finisher components	30
Printing	31
Accessing the Print screen	32
For printing	32
Loading trays	33
Trays 1,2, and3	34
To load paper	34
To load tabbed sheets	35
Optional Tray4	36
To load paper	36
To load tabbed sheets	37
Multi-sheet bypass tray	38
To load paper	38
To load tabbed sheets	39
Supported paper sizes for trays	40
Adding toner and staple cartridges	41
Adding toner	42
Replacing hpstaple cartridges	44
Emptying the trash basket	49
Emptying the trash basket	50
Hole Punch Unit and Hole Punch & Fold Unit	50
Trimmer Unit	51
Clearing paper jams	53
Clearing paper jams	54
Paper jam codes	55
Paper Sizes	57
Warranty and regulatory information	59
Hewlett-Packard limited warranty statement	59