HP Color LaserJet CP2020 Service Manual - Page 38

Menu item Display contrast Sub-menu item Calibrate color Cartridge low Replace Supplies Color Supply Out Adjust Alignment Lightest Lighter Medium Darker Darkest Sub-menu item After power on Calibrate now (1-20) Override out Stop at out Stop Printing (default) Continue Black Print Test Page Adjust Tray Description After power on: Select how soon the product will calibrate after you turn it on. The default setting is 15 minutes. Calibrate now: Makes the product perform a calibration immediately. If a job is processing, the product calibrates after the job is complete. If an error message is displayed, you must clear the error first. The percentage threshold determines when the product begins reporting low toner. The message is either reported on the control-panel display or using the toner LED, if it exists. Override out: If the product determines that a print cartridge has reached the end of life, select this setting to continue printing until there is a decrease in print quality. Stop at out: If the product determines that a print cartridge is empty, the cartridge must be replaced before printing can continue. This is the default setting. Stop Printing: If the product determines that a color cartridges is empty, it stops printing. This is the default setting. Continue Black: If the product determines that a color cartridges is empty, continue printing using black only. Print Test Page: Print a test page that tests printer alignment. Adjust Tray : Adjust the alignment of the specified tray. Select the level of contrast for the display. The default setting is Medium. 18 Chapter 2 Control panel ENWW