HP Color LaserJet CP2020 Service Manual - Page 40
Network config. menu, Use this menu to establish network configuration settings., - service manual
View all HP Color LaserJet CP2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Network config. menu Use this menu to establish network configuration settings. Menu item TCP IP config Auto crossover Network services Show IP address Link speed Restore defaults Sub-menu item Automatic Manual On Off IPv4 IPv6 DHCPv6 No Yes Automatic (default) 10T Full 10T Half 100TX Full 100TX Half Description Select Automatic to automatically configure all the TCP/IP settings. Select Manual to manually configure the IP address, subnet mask, and default gateway. The default setting is Automatic. This item is used when you are connecting the product directly to a personal computer using an Ethernet cable (you might have to set this to On or Off depending on the computer being used). The default setting is On. This item is used by the system administrator to limit the network services available on this product. On Off The default setting for all items is On. No: The product IP address does not appear on the control-panel display. Yes: The product IP address appears on the controlpanel display, alternating between supplies information and the IP address of the device. The IP address does not display if an error condition exits. The default setting is No. Sets the link speed manually if needed. After setting the link speed, the product automatically restarts. Press OK to restore the network configuration settings to the default values. 20 Chapter 2 Control panel ENWW