HP DL320 HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide - Page 21
Optical Device/Diskette Drive Assembly,
UPC - 829160513218
View all HP DL320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Removal and Replacement Procedures Optical Device/Diskette Drive Assembly The optical device/diskette drive assembly option is for either a CD-ROM/diskette drive or a DVD-ROM/diskette drive combination. The following procedure applies to both options. To remove the optical device/diskette drive assembly: 1. Power down the server. See "Powering Down the Server" in this chapter. 2. Remove the shipping/ejector key from the chassis if you have not already done so. See "Shipping/Ejector Key" in this chapter. 3. Insert the shipping/ejector key approximately 1.25 cm (0.5 in) into the optical device/diskette drive assembly ejector port on the lower right corner of the server front panel (1) to eject the optical device/diskette drive assembly (2). Figure 2-4: Ejecting the optical device/diskette drive assembly CAUTION: To reduce the risk of thermal damage, do not operate the server without either the optical device/diskette drive assembly or the bezel blank installed. To replace the assembly, slide the assembly into the bay until it is fully seated. 2-10 HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Moonstar 306 Part Number: 293164-004 Last Saved On: 9/22/03 1:47 PM