HP DL320 HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide - Page 40
ATA Cables, Disconnecting the ATA cables
UPC - 829160513218
View all HP DL320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Removal and Replacement Procedures ATA Cables To remove the ATA cables: 1. Power down the server. See "Powering Down the Server" in this chapter. 2. Remove the access panel. See "Access Panel" in this chapter. 3. Remove the PCI riser board assembly. See "PCI Riser Board Assembly" in this chapter. 4. Remove the center wall. See "Center Wall" in this chapter. 5. Disconnect the ATA cable from the secondary ATA controller (1) and hard drive connector (2). 6. Disconnect the ATA cable from the primary ATA controller (3) and hard drive connector (4). Figure 2-24: Disconnecting the ATA cables Reverse steps 1 through 6 to replace the ATA cables. HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide 2-29 HP CONFIDENTIAL Codename: Moonstar 306 Part Number: 293164-004 Last Saved On: 9/22/03 1:47 PM