HP DL320 HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide - Page 41
Optical Device/Diskette Drive Assembly Cable
UPC - 829160513218
View all HP DL320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Removal and Replacement Procedures Optical Device/Diskette Drive Assembly Cable To remove the optical device/diskette drive assembly cable: 1. Power down the server. See "Powering Down the Server" in this chapter. 2. Remove the access panel. See "Access Panel" in this chapter. 3. Remove the PCI riser board assembly. See "PCI Riser Board Assembly" in this chapter. 4. Remove the center wall. See "Center Wall" in this chapter. 5. Disconnect the optical device/diskette drive assembly cable from the optical device/diskette drive assembly backplane (1). 6. Disconnect the optical device/diskette drive assembly cable from the system board (2). Figure 2-25: Disconnecting the optical device/diskette drive assembly cable Reverse steps 1 through 6 to replace the optical device/diskette drive assembly cable. 2-30 HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Moonstar 306 Part Number: 293164-004 Last Saved On: 9/22/03 1:47 PM