HP DL320 HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide - Page 29

Removing the hard drive from a hard drive tray

Get HP DL320 - ProLiant - G3 PDF manuals and user guides
UPC - 829160513218
View all HP DL320 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Removal and Replacement Procedures 6. Remove the four 6-32 Phillips-head screws that secure the hard drive to the hard drive tray (1). 7. Remove the hard drive from the hard drive tray (2). Figure 2-12: Removing the hard drive from a hard drive tray CAUTION: Review "Guidelines for SCSI Hard Drives" and "Guidelines for ATA Hard Drives" in this chapter to ensure proper jumper settings and hard drive configuration. CAUTION: When connecting the power cable to the hard drives, ensure that the connectors are installed so that the red wire faces right when viewed from the front of the server. IMPORTANT: Ensure that the hard drives are installed with the data and power connectors along the bottom of the tray, facing away from the front vent holes. Reverse steps 1 through 7 to replace the hard drive. 2-18 HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Moonstar 306 Part Number: 293164-004 Last Saved On: 9/22/03 1:47 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Removal and Replacement Procedures
6.
Remove the four 6-32 Phillips-head screws that secure the hard drive to the
hard drive tray (1).
7.
Remove the hard drive from the hard drive tray (2).
Figure 2-12: Removing the hard drive from a hard drive tray
CAUTION:
Review “Guidelines for SCSI Hard Drives” and “Guidelines for ATA Hard Drives”
in this chapter to ensure proper jumper settings and hard drive configuration.
CAUTION:
When connecting the power cable to the hard drives, ensure that the connectors
are installed so that the red wire faces right when viewed from the front of the server.
IMPORTANT:
Ensure that the hard drives are installed with the data and power connectors along the
bottom of the tray, facing away from the front vent holes.
Reverse steps 1 through 7 to replace the hard drive.
2-18
HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide
HP CONFIDENTIAL
Codename: Moonstar 306 Part Number: 293164-004 Last Saved On: 9/22/03 1:47 PM