HP DL320 HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide - Page 39
Cables, Two-Device Terminated SCSI Cable
UPC - 829160513218
View all HP DL320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Removal and Replacement Procedures Cables The following sections of this guide contain removal and replacement procedures for the standard cables that ship with the server: • Two-Device Terminated SCSI cable • ATA cables • Optical Device/Diskette Drive Assembly cable Two-Device Terminated SCSI Cable To remove the two-device terminated SCSI cable: 1. Power down the server. See "Powering Down the Server" in this chapter. 2. Remove the access panel. See "Access Panel" in this chapter. 3. Remove the PCI riser board assembly. See "PCI Riser Board Assembly" in this chapter. 4. Remove the center wall. See "Center Wall" in this chapter. 5. Disconnect the SCSI cable from the hard drives (1). 6. Disconnect the SCSI cable from the SCSI module (2). Figure 2-23: Disconnecting the two-device terminated SCSI cable Reverse steps 1 through 6 to replace the two-device terminated SCSI cable. 2-28 HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Moonstar 306 Part Number: 293164-004 Last Saved On: 9/22/03 1:47 PM