HP DL320 HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide - Page 70
Power Supply, Memory, Table 5-2, Power Supply Specifications, SDRAM DIMM Specifications
UPC - 829160513218
View all HP DL320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Specifications Power Supply Table 5-2: Power Supply Specifications Item Input voltage specifications Rated input voltage Rated input line Frequency range Rated input power Rated input current Steady state power Maximum peak power Ambient temperature range Operating Non-operating Relative humidity (non-condensing) Operating Non-operating Dielectric voltage withstand Input to output Input to ground Maximum wet-bulb temperature Description 100 VAC to 240 VAC 180 VAC to 264 VAC (90 VAC to 132 VAC) 47 to 63 Hz 307 W 3.3 A, 1.7 A (110 V, 220 V) 180 W 200 W for two minutes 10°C to 35°C (50°F to 95°F) -40°C to 70°C (-40°F to 158°F) 10% to 90% 5% to 95% 3000 VAC/minute 1500 VAC/minute 28°C (82.4°F) Memory Table 5-3: SDRAM DIMM Specifications Item Description Size 128 MB, 256 MB, 512 MB and 1GB Speed 200/266 MHz Width 64 bits Type PC2100 ECC registered DDR SDRAM DIMMs Note: DIMMs must be industry-standard 184-pin PC2100 DDR DIMMs. The DDR DIMMs must support CAS Latency 2, or greater. They must also contain the mandatory Joint Electronic Device Engineering Council (JEDEC) Serial Presence Detect (SPD). Use HP supplied SDRAM only. HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide 5-3 HP CONFIDENTIAL Codename: MoonStar 306 Part Number: 293164-004 Last Saved On: 9/22/03 1:55 PM