HP DL320 HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide - Page 34

Expansion Board, Removing an expansion board from the PCI riser, board assembly

Get HP DL320 - ProLiant - G3 PDF manuals and user guides
UPC - 829160513218
View all HP DL320 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Removal and Replacement Procedures Expansion Board To remove an expansion board: CAUTION: To avoid the risk of damage to the system or expansion boards, remove all power cords before installing or removing an expansion board. When the front panel power switch is off, auxiliary power is still connected to the PCI expansion slot and may damage the card. 1. Power down the server. See "Powering Down the Server" in this chapter. 2. Remove the access panel. See "Access Panel" in this chapter. 3. Disconnect all cables from the expansion board. 4. Remove the PCI riser board assembly. See "PCI Riser Board Assembly" in this chapter. 5. Apply even pressure to pull the expansion board out of its socket in the PCI riser board assembly. Figure 2-17: Removing an expansion board from the PCI riser board assembly Reverse steps 1 through 5 to replace an expansion board. Use the PCI card guide on the assembly to position the board in the socket. IMPORTANT: Ensure that the expansion board is seated securely in the expansion slot before replacing the PCI riser board assembly and access panel. HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide 2-23 HP CONFIDENTIAL Codename: Moonstar 306 Part Number: 293164-004 Last Saved On: 9/22/03 1:47 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Removal and Replacement Procedures
Expansion Board
To remove an expansion board:
CAUTION:
To avoid the risk of damage to the system or expansion boards, remove all power
cords before installing or removing an expansion board. When the front panel power switch is
off, auxiliary power is still connected to the PCI expansion slot and may damage the card.
1.
Power down the server. See “Powering Down the Server” in this chapter.
2.
Remove the access panel. See “Access Panel” in this chapter.
3.
Disconnect all cables from the expansion board.
4.
Remove the PCI riser board assembly. See “PCI Riser Board Assembly” in this chapter.
5.
Apply even pressure to pull the expansion board out of its socket in the PCI riser board
assembly.
Figure 2-17: Removing an expansion board from the PCI riser
board assembly
Reverse steps 1 through 5 to replace an expansion board. Use the PCI card guide on the
assembly to position the board in the socket.
IMPORTANT:
Ensure that the expansion board is seated securely in the expansion slot before
replacing the PCI riser board assembly and access panel.
HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide
2-23
HP CONFIDENTIAL
Codename: Moonstar 306 Part Number: 293164-004 Last Saved On: 9/22/03 1:47 PM