HP DL320 HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide - Page 44
PCI Riser Board Assembly in this Locating and removing the system battery
UPC - 829160513218
View all HP DL320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Removal and Replacement Procedures To remove the battery: 1. Power down the server. See "Powering Down the Server" in this chapter. 2. Remove the access panel. See "Access Panel" in this chapter. 3. Locate the battery on the system board. Figure 2-27: Locating and removing the system battery 4. If necessary, remove the PCI riser board assembly to access the battery location. See "PCI Riser Board Assembly" in this chapter. 5. Press the battery release lever away from the battery (1). 6. Lift the battery on the lever side and pull it out of the holder (2). IMPORTANT: Do not bend the retaining clip during battery replacement. For proper operation, the clip must maintain a position of contact with the battery. Reverse steps 1 through 6 to replace the battery, ensuring that the new battery is installed with the positive side up. HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide 2-33 HP CONFIDENTIAL Codename: Moonstar 306 Part Number: 293164-004 Last Saved On: 9/22/03 1:47 PM