HP DL320 HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide - Page 30

Single Channel Wide Ultra3 SCSI Controller Module

Get HP DL320 - ProLiant - G3 PDF manuals and user guides
UPC - 829160513218
View all HP DL320 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Removal and Replacement Procedures Single Channel Wide Ultra3 SCSI Controller Module To remove the SCSI module: 1. Power down the server. See "Powering Down the Server" in this chapter. 2. Remove the access panel. See "Access Panel" in this chapter. CAUTION: Prevent damage to the connector pins by lifting the SCSI module evenly and with equal pressure on the board. Tilting the board causes the connector pins to bend. 3. Remove the SCSI module by pinching the tops of the support posts and carefully lifting the SCSI module from the system board. 4. Disconnect the SCSI cable from the SCSI controller connector on the module. Figure 2-13: Removing the SCSI module from the system board To replace the SCSI module, reverse steps 1 through 4, ensuring that the SCSI module seats securely on the support posts. HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide 2-19 HP CONFIDENTIAL Codename: Moonstar 306 Part Number: 293164-004 Last Saved On: 9/22/03 1:47 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Removal and Replacement Procedures
Single Channel Wide Ultra3 SCSI Controller Module
To remove the SCSI module:
1.
Power down the server. See “Powering Down the Server” in this chapter.
2.
Remove the access panel. See “Access Panel” in this chapter.
CAUTION:
Prevent damage to the connector pins by lifting the SCSI module evenly and with
equal pressure on the board. Tilting the board causes the connector pins to bend.
3.
Remove the SCSI module by pinching the tops of the support posts and carefully lifting
the SCSI module from the system board.
4.
Disconnect the SCSI cable from the SCSI controller connector on the module.
Figure 2-13: Removing the SCSI module from the system board
To replace the SCSI module, reverse steps 1 through 4, ensuring that the SCSI module seats
securely on the support posts.
HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide
2-19
HP CONFIDENTIAL
Codename: Moonstar 306 Part Number: 293164-004 Last Saved On: 9/22/03 1:47 PM