HP DesignJet T3500 Users Guide - Page 198
Lines are discontinuous, Lines are blurred
View all HP DesignJet T3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
● The borders of colored blocks are wrongly colored. To correct this kind of problem: 1. Align the printhead. See Align the printhead on page 227. 2. Reseat the printhead by removing and then reinserting it. See Remove the printhead on page 142 and Insert the printhead on page 145. Lines are discontinuous If your lines are broken in the following way: 1. Check that you are using appropriate print-quality settings. See Printing on page 67. 2. When printing on uncoated paper in Fast mode, try loading the paper as Bright Bond. 3. Align the printhead. See Align the printhead on page 227. 4. Reseat the printhead by removing and then reinserting it. See Remove the printhead on page 142 and Insert the printhead on page 145. Lines are blurred Humidity can cause ink to soak into the paper, making the lines blurred and fuzzy. Try the following: 1. Check that your environmental conditions (temperature, humidity) are suitable for high-quality printing. See Environmental specifications on page 247. 2. Check that the paper type selected in the front panel is the same as the paper type you are using. See View information about the paper on page 61. 188 Chapter 21 Troubleshooting print-quality issues ENWW