HP DesignJet T3500 Users Guide - Page 57
Change the graphic language setting, Under Mac OS X
View all HP DesignJet T3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
● Default IP: Specify the IP address to use when the printer is unable to obtain an IP address from the network when powered on or when reconfigured to use BOOTP or DHCP. ● Send DHCP requests: Specify whether DHCP requests are transmitted when a legacy default IP address or a default Auto IP is assigned. To configure the same network settings from the front panel, press , then Connectivity > Network connectivity > Gigabit Ethernet > Modify configuration. You have various other options available from the Connectivity > Network connectivity > Advanced menu. ● Allow SNMP: Specify whether SNMP is permitted. ● Embedded Web Server > Allow EWS: Specify whether the Embedded Web Server is enabled. ● Web Services > Printer utility software: Enable or disable the HP Utility. ● Web Services > Color and paper management: View the color and paper management settings. ● Web Services > Scanner SDK. ● Restore factory settings: restore the initial default values of the network settings. Change the graphic language setting You can change the graphic language setting by launching the Embedded Web Server from the HP Utility with the following steps. 1. Under Windows, select the Admin tab, then Printer settings > Printing preferences. Under Mac OS X, select Printer settings > Printing preferences. 2. Select one of the following options. ● Select Automatic to let the printer determine which type of file it is receiving. This is the default setting; it works for most software applications. You should not normally need to change it. ● Select HP-GL/2 only if you are sending a file of that type directly to the printer, without going through a printer driver. ● Select PDF only if you are sending a file of that type directly to the printer, without going through a printer driver (PostScript printers only). ● Select PostScript only if you are sending a file of that type directly to the printer, without going through a printer driver (PostScript printers only). ● Select TIFF only if you are sending a file of that type directly to the printer, without going through a printer driver (PostScript printers only). ● Select JPEG only if you are sending a file of that type directly to the printer, without going through a printer driver (PostScript printers only). Alternatively, you can change the graphic language setting from the front panel. Press printing configuration > Graphics language. Select the desired option. , then Default NOTE: If the graphic language is set from the Embedded Web Server, it overrides the front panel setting. ENWW Change the graphic language setting 47