HP DesignJet T3500 Users Guide - Page 207
Corrective action, If you still have a problem, Try using a higher print-quality option. See
View all HP DesignJet T3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
Here is an example of a gray printhead in a good state: And here is an example of the same printhead in a bad state: Corrective action 1. Clean the printhead if necessary (see Clean the printhead on page 227). Then reprint the Image Diagnostics Print to see whether the problem has been solved. 2. If the problem remains, clean the printhead again, and reprint the Image Diagnostics Print to see whether the problem has been solved. 3. If the problem still remains, replace the printhead (see Handling ink cartridges and printhead on page 137), or contact HP Support (see Contact Support on page 240). If you still have a problem If you still experience print-quality problems after applying the advice in this chapter, here are some further things that you can do: ● Try using a higher print-quality option. See Printing on page 67. ● Check the driver you are using to print with. If it is a non-HP driver, consult the driver vendor about the problem. You could also try using the correct HP driver, if feasible. The latest HP drivers can be downloaded from http://www.hp.com/go/T3500/drivers. ENWW If you still have a problem 197