HP DesignJet T795 Using your printer - Page 117
Check the printhead status, Remove a printhead, this indicates that non-HP ink is being used. See
View all HP DesignJet T795 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Check the printhead status The printer automatically checks and services the printheads after each print. Follow the steps below to get more information on your printheads. 1. From the front panel, press then , then the printhead on which you want information. 2. The front panel displays: ● Colors ● Product name ● Product number ● Serial number ● Status, see Front-panel error messages on page 167 ● Volume of ink it has used ● Warranty status You can also get most of this information from the HP Utility. For an explanation of the printhead status messages, see Printhead status messages on page 161. If the warranty status is See warranty note, this indicates that non-HP ink is being used. See the Legal Information document provided with your printer for details of the warranty implications. Remove a printhead CAUTION: Make sure the printer wheels are locked (the brake lever is pressed down) to prevent the printer from moving. CAUTION: Printhead replacement must be performed with the printer powered on. 1. From the front panel, press , then , then Replace printheads. Alternatively, press , then , then Ink > Replace printheads. 2. The printer moves the carriage into the correct position. CAUTION: If the carriage is left in the removal position for more than three minutes without inserting or removing any printheads, it tries to move back to its normal position in the right-hand end. ENWW Check the printhead status 109