HP DesignJet T795 Using your printer - Page 44
Rest the blue end of the spindle on the right side roll holder.
View all HP DesignJet T795 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
You should stand behind the printer when loading the lower roll (roll 2). You may stand behind or in front of the printer when loading the upper roll (roll 1). CAUTION: If your height is less than 1.6 m (5 ft 3 in), loading a roll while standing in front of the printer may cause back pain or other physical problems. 2. In the T1300 series only, if you start to load roll 1 while roll 2 is already loaded, roll 2 is withdrawn to the standby position, so that it can be printed on again without reloading whenever required. NOTE: If at any time you open a roll cover while that roll is in the standby position, the roll will be automatically unloaded, and you will have to reload it the next time you want to print on it. 3. Open the roll cover, if it is not already open. 4. Rest the spindle's black end on the left side roll holder. Do not put the end completely into the roll holder. 5. Rest the blue end of the spindle on the right side roll holder. 6. With both hands, push the spindle into both roll holders at the same time. 7. If the edge of the roll is not straight or torn (sometimes due to tape used to hold end of the roll), pull the paper slightly and cut a straight edge. 36 Chapter 5 Paper handling ENWW