HP DesignJet T795 Using your printer - Page 150
Horizontal lines across the image (banding), Print the Image Diagnostics Print. See
View all HP DesignJet T795 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Alternatively, or if you have other print quality problems, you can continue reading this chapter. Horizontal lines across the image (banding) If your printed image suffers from added horizontal lines as shown (the color may vary): 1. Check that the paper type you have loaded corresponds to the paper type selected in the front panel and in your software. See View information about the paper on page 40. 2. Check that you are using appropriate print-quality settings for your purposes (see Printing on page 46). In some cases, you can overcome a print-quality problem merely by selecting a higher print-quality level. For instance, if you have set the Print Quality slider to Speed, try setting it to Quality. If you change the printquality settings, you may wish to reprint your job at this point in case the problem has been solved. 3. Print the Image Diagnostics Print. See The Image Diagnostics Print on page 152. 4. If the printheads are working correctly, go to the front panel and press and then to see the paper advance calibration status. If the status is DEFAULT, try performing paper advance calibration: see Recalibrate the paper advance on page 138. If the problem persists despite all the above actions, contact your customer service representative for further support. 142 Chapter 17 Troubleshooting print-quality issues ENWW