HP Deskjet 450 HP Deskjet 450 - Bluetooth Printing Guide - Page 46

Start, Control Panel., Wireless Link, Bluetooth, hp deskjet 450, delete

Page 46 highlights

printer is connected to computer but will not print or did not appear If the printer will not print or does not appear in the printers list, you may have entered the incorrect setting for encryption required. The settings on the PC must match the settings that are on your hp deskjet 450 series printer. 1. Print a Bluetooth configuration page. 2. Check the Encryption Required Line. • If Encryption = Off, then encryption and authentication are off, and you must choose No. • If Encryption = On, then encryption and authentication are on, and you must choose Yes. If your settings do not match, you must delete the printer and then re-run the Wireless utility: 1. Click Start > Control Panel. 2. Double-click the Wireless Link icon. 3. Click the Bluetooth tab. 4. Highlight the hp deskjet 450 printer. 5. Press delete. 6. Restart the procedure to connect the printer to the computer using HCRP on page 8. You can also reset your printer to factory defaults which has encryption/authentication off (see reset to factory defaults on page 58). 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63

43
printer is connected to computer but will not print or did not appear
If the printer will not print or does not appear in the printers list, you may have
entered the incorrect setting for encryption required. The settings on the PC must
match the settings that are on your hp deskjet 450 series printer.
1.
Print a
Bluetooth configuration page
.
2.
Check the Encryption Required Line.
If
Encryption = Off
, then encryption and authentication are off, and you
must choose
No
.
If
Encryption = On,
then encryption and authentication are on, and you
must choose
Yes
.
If your settings do not match, you must delete the printer and then re-run the
Wireless utility:
1.
Click
Start
>
Control Panel.
2.
Double-click the
Wireless Link
icon.
3.
Click the
Bluetooth
tab.
4.
Highlight the
hp deskjet 450
printer.
5.
Press
delete
.
6.
Restart the procedure to
connect the printer to the computer using HCRP
on
page 8.
You can also reset your printer to factory defaults which has
encryption/authentication off (see
reset to factory defaults
on
page 58).