HP ENVY Photo 6200 User Guide - Page 75
Change network settings, IP Settings
View all HP ENVY Photo 6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Change network settings From the printer control panel, you can set up and manage your printer's wireless connection and perform a variety of network management tasks. This includes viewing and changing network settings, restoring network defaults, and turning the wireless function on or off. CAUTION: Network settings are provided for your convenience. However, unless you are an advanced user, you should not change some of these settings (such as the link speed, IP settings, default gateway, and firewall settings). To print network settings Do one of the following: ● On the printer control panel display, from the Home screen, touch (Wireless) to display the network status screen. Touch Print Info to print the network configuration page. ● On the printer control panel display, from the Home screen, touch touch Network Configuration Report. ( Setup ), touch Tools, and then To change IP settings The default IP setting for the IP settings is Automatic, which sets the IP settings automatically. If you are an advanced user and want to use different settings (such as the IP address, subnet mask, or the default gateway), you can change them manually. TIP: Before setting a manual IP address, it is recommended to first connect the printer to the network using Automatic mode. This allows the router to configure the printer with other needed settings like subnet mask, default gateway and DNS address. CAUTION: Be careful when manually assigning an IP address. If you enter an invalid IP address during the installation, your network components cannot connect with the printer. 1. From the printer control panel display, touch (Wireless), and then touch ( Settings ). 2. Touch Advanced Settings. 3. Touch IP Settings. A message appears warning that changing the IP address removes the printer from the network. 4. Touch OK to continue. 5. Automatic is selected by default. To change the settings manually, touch Manual, and then enter the appropriate information for the following settings: ● IP Address ● Subnet Mask ● Default Gateway ● DNS Address 6. Enter your changes, and then touch Apply. ENWW Change network settings 69