HP EliteDesk 800 G3 Maintenance and Service Guide - Page 32
Front bezel security
View all HP EliteDesk 800 G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Front bezel security The front bezel can be secured in place by installing a screw through the front of the chassis into the front bezel. 1. Prepare the computer for disassembly (Preparation for disassembly on page 19) 2. Remove the access panel (Access panel on page 20) 3. Remove the silver 6-32 security screw located inside the front bezel. 4. Replace the front bezel. 5. Install the security screw through the inside front of the chassis into the front bezel to secure the bezel in place. 6. Replace the computer access panel. 22 Chapter 4 Removal and replacement procedures - Microtower (MT) chassis
Front bezel security
The front bezel can be secured in place by installing a screw through the front of the chassis into the front
bezel.
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
19
)
2.
Remove the access panel (
Access panel
on page
20
)
3.
Remove the silver 6-32 security screw located inside the front bezel.
4.
Replace the front bezel.
5.
Install the security screw through the inside front of the chassis into the front bezel to secure the bezel
in place.
6.
Replace the computer access panel.
22
Chapter 4
Removal and replacement procedures – Microtower (MT) chassis