HP EliteDesk 800 G3 Maintenance and Service Guide - Page 43
so that the bottom of the, To install a full-length expansion card
![]() |
View all HP EliteDesk 800 G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
8. To install a half-length expansion card, hold the card just above the expansion socket on the system board then move the card toward the rear of the chassis (1) so that the bottom of the bracket on the card slides into the small slot on the chassis. Press the card straight down into the expansion socket on the system board (2). NOTE: When installing an expansion card, press firmly on the card so that the whole connector is seated properly in the expansion card socket. 9. To install a full-length expansion card you must remove the hard drive cage to allow room for installing the card (Drive cage on page 28). a. To install a full-length expansion card, hold the card just above the expansion socket on the system board then move the card toward the rear of the chassis (1) so that the bottom of the bracket on the card slides into the small slot on the chassis. Press the card straight down into the expansion socket on the system board (2). b. Replace the drive cage (Drive cage on page 28). c. Connect the power and data cables to the rear of the drives in the hard drive cage. Expansion cards 33
![](/manual_guide/products/hewlettpackard-elitedesk-800-g3-maintenance-service-guide-31be2e7/43.png)