HP EliteDesk 800 G3 Maintenance and Service Guide - Page 63
with the screw, and reassemble the computer.
View all HP EliteDesk 800 G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
5. To install an M.2 SSD card, slide the pins on the card into the system board connector while holding the card at approximately a 30° angle (1). Press the other end of the card down (2), and then secure the card with the screw (3). 6. Replace the drive cage ( Drive cage on page 28) and reassemble the computer. Drives 53
5.
To install an M.2 SSD card, slide the pins on the card into the system board connector while holding the
card at approximately a 30° angle
(1)
. Press the other end of the card down
(2)
, and then secure the card
with the screw
(3)
.
6.
Replace the drive cage (
Drive cage
on page
28
) and reassemble the computer.
Drives
53