HP EliteDesk 800 G3 Maintenance and Service Guide - Page 44
Lock any security devices that were disengaged when the computer access panel was removed.
![]() |
View all HP EliteDesk 800 G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
10. Rotate the slot cover retention latch back in place to secure the expansion card. 11. Connect external cables to the installed card, if needed. Connect internal cables to the system board, if needed. 12. Replace the computer access panel. 13. Reconnect the power cord and turn on the computer. 14. Lock any security devices that were disengaged when the computer access panel was removed. 15. Reconfigure the computer, if necessary. 34 Chapter 4 Removal and replacement procedures - Microtower (MT) chassis
![](/manual_guide/products/hewlettpackard-elitedesk-800-g3-maintenance-service-guide-31be2e7/44.png)
10.
Rotate the slot cover retention latch back in place to secure the expansion card.
11.
Connect external cables to the installed card, if needed. Connect internal cables to the system board, if
needed.
12.
Replace the computer access panel.
13.
Reconnect the power cord and turn on the computer.
14.
Lock any security devices that were disengaged when the computer access panel was removed.
15.
Reconfigure
the computer, if necessary.
34
Chapter 4
Removal and replacement procedures – Microtower (MT) chassis