HP EliteDesk 800 G3 Maintenance and Service Guide - Page 59
If installing a new drive, connect the opposite end of the data cable to the appropriate system board
![]() |
View all HP EliteDesk 800 G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
7. Connect the power cable (1) and data cable (2) to the rear of the hard drive. 8. If installing a new drive, connect the opposite end of the data cable to the appropriate system board connector. NOTE: You must connect the primary hard drive data cable to the dark blue connector labeled SATA0 to avoid any hard drive performance problems. If you are adding a second hard drive, connect the data cable to one of the light blue SATA connectors. 9. Reassemble the computer. Drives 49
![](/manual_guide/products/hewlettpackard-elitedesk-800-g3-maintenance-service-guide-31be2e7/59.png)
7.
Connect the power cable
(1)
and data cable
(2)
to the rear of the hard drive.
8.
If installing a new drive, connect the opposite end of the data cable to the appropriate system board
connector.
NOTE:
You must connect the primary hard drive data cable to the dark blue connector labeled SATA0 to
avoid any hard drive performance problems. If you are adding a second hard drive, connect the data
cable to one of the light blue SATA connectors.
9.
Reassemble the computer.
Drives
49