HP EliteDesk 800 G3 Maintenance and Service Guide - Page 66
To reinstall the assembly, reverse the removal procedure.
![]() |
View all HP EliteDesk 800 G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
6. From the front of the computer, remove the Torx T15 screw that secures the assembly to the chassis. NOTE: Chassis color may vary. 7. Rotate the right side of the assembly away from the computer, and then pull the assembly out of the front of the chassis while threading the cables through the hole in the front of the chassis. To reinstall the assembly, reverse the removal procedure. 56 Chapter 4 Removal and replacement procedures - Microtower (MT) chassis
![](/manual_guide/products/hewlettpackard-elitedesk-800-g3-maintenance-service-guide-31be2e7/66.png)
6.
From the front of the computer, remove the Torx T15 screw that secures the assembly to the chassis.
NOTE:
Chassis color may vary.
7.
Rotate the right side of the assembly away from the computer, and then pull the assembly out of the
front of the chassis while threading the cables through the hole in the front of the chassis.
To reinstall the assembly, reverse the removal procedure.
56
Chapter 4
Removal and replacement procedures – Microtower (MT) chassis