HP EliteDesk 800 G3 Maintenance and Service Guide - Page 49
Installing a 5.25-inch drive, IMPORTANT
![]() |
View all HP EliteDesk 800 G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Installing a 5.25-inch drive 1. Prepare the computer for disassembly (Preparation for disassembly on page 19) 2. Remove the access panel (Access panel on page 20) 3. Remove the front bezel (Front bezel on page 21). If you are installing a drive in a bay covered by a bezel blank, remove the bezel blank. See Removing bezel blanks on page 23 for more information. 4. If you are installing an optical drive, install four M3 metric mounting screws (not provided) in the lower holes on each side of the drive. NOTE: When replacing an optical drive, transfer the four M3 metric mounting screws from the old drive to the new one. IMPORTANT: Use only 5 mm long screws as mounting screws. Longer screws can damage the internal components of the drive. Drives 39
![](/manual_guide/products/hewlettpackard-elitedesk-800-g3-maintenance-service-guide-31be2e7/49.png)