HP Indigo WS6600 Working with Indigo ElectroInk SilverHow-to Guide - Page 35
A. Full color calibration, Color calibration recommendations per substrate, streaks
View all HP Indigo WS6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
A Full color calibration It explains full color calibration. ● HP Indigo ElectroInk Silver is visually stable, therefore it is not necessary / not recommended to perform Full Color Calibration (FCC). ● Full Color Calibration for Silver changes the BID electrode voltage only. (This can also be done manually, as described in Performing Silver color adjustments on page 14). NOTE: OD target for transparent media should be changed manually (see Color calibration recommendations per substrate on page 31). ● Silver ink can be selected similarly to all other colors. Silver color calibration starts at the end of other colors calibration. Silver ink will not fail calibration of other colors. ● When working with uncoated matte substrates (for example, wine label substrates), do not perform full color calibration. Perform troubleshooting if issues exist (for example: image memory, flow streaks, etc) - perform manual silver color calibration via Print Care (as described in Silver color appearance and adjustments on page 11). Color calibration recommendations per substrate If full color calibration (FCC) is needed, refer to the table below for the Silver ink optical density (OD) targets per substrate type. Table A-1 FCC and Silver ink OD targets per substrate type Substrate type Perform FCC? OD target (M0) SPM on press OD target (M0) External X-Rite OD target (M3) External eXact Coated gloss white (synthetic or paper) Coated semi matte white (synthetic or paper) Possible Possible 0.07 0.09 1.1 ± 0.05 0.07 0.09 1.1 ± 0.05 Coated matte white Possible 0.07 0.09 1.1 ± 0.05 Uncoated / wine label No No target Adjust manually through It is recommended to use visual Print Care inspection only Transparent Possible 0.11 0.13 1.0 ± 0.05 (change manually) See below for information about measuring the Silver ink optical density (OD). Full color calibration 31